What Hodge, LA rainfall means for your gutters
At roughly 55.1 inches of rain a year, this is one of the wetter parts of the country. A 6-inch K-style gutter carries close to half again the volume of a 5-inch profile, and at this rainfall the larger section is the sensible default rather than an upgrade.
| Annual rainfall | 55.1 inches |
|---|---|
| Recommended gutter | 6-inch K-style |
| Downspout every | 30 feet of run |
| Typical single-storey home | 5 downspouts |
| Installed cost, seamless aluminium | $7–$15 per linear foot |
| Typical 160-foot job | $1,125–$2,400 |
Climate figures are NOAA 1991–2020 normals from Monroe Regional Airport, 44 miles away. Cost figures are typical local ranges, not a quote.
Ice and freeze risk in Hodge, LA
January lows average 37°F, so freezing happens but rarely persists.
Occasional overnight freezes are enough to split a gutter seam that is already holding standing water, which is an argument for correct pitch rather than for cold-weather hardware.
When to clear gutters in Hodge, LA
With 55.1 inches of rain a year and a long wet season, three clear-outs a year suits this climate — spring and again before October.
Nothing freezes here, so timing follows the rain rather than the calendar. Clearing before the wet season is what prevents overflow down the fascia — the damage in a no-freeze climate is rot, not ice.
Seamless gutter cost in Hodge, LA
Installed seamless aluminium runs $7–$15 per linear foot in Hodge, putting a typical 160-foot single-storey job at $1,125–$2,400. Rural rates run below the national average, though travel charges can offset that on longer call-outs.
The 6-inch profile recommended for this rainfall carries a higher material cost per foot than the smaller section, which is already reflected above. Roof height, fascia condition and the number of corners move the final figure more than the gutter itself does.
Gutter questions specific to Hodge, LA
What size gutters do I need in Hodge, LA?
At roughly 55.1 inches of rain a year, this is one of the wetter parts of the country. A 6-inch K-style gutter carries close to half again the volume of a 5-inch profile, and at this rainfall the larger section is the sensible default rather than an upgrade. For a typical single-storey roof here, plan on about 5 downspouts, one roughly every 30 feet of run.
How much do seamless gutters cost in Hodge, LA?
Installed seamless aluminium generally runs $7–$15 per linear foot locally, so a typical 160-foot single-storey job lands around $1,125–$2,400. Rural rates run below the national average, though travel charges can offset that on longer call-outs. These are typical ranges rather than a quote — the price turns on roof height, fascia condition and how many corners the run has.
How often should gutters be cleaned in Hodge, LA?
Three times a year suits this climate, given roughly 55.1 inches of annual rain. Nothing freezes here, so timing follows the rain rather than the calendar. Clearing before the wet season is what prevents overflow down the fascia — the damage in a no-freeze climate is rot, not ice.
Do I need to worry about ice dams in Hodge, LA?
January lows average 37°F, so freezing happens but rarely persists. Occasional overnight freezes are enough to split a gutter seam that is already holding standing water, which is an argument for correct pitch rather than for cold-weather hardware.
When is the best time to have gutters installed in Hodge, LA?
Aim for spring and again before October. Seamless gutter is formed on site from a coil machine, and hanging it is easier and the sealant cures better above freezing, so late autumn work gets progressively harder to schedule as temperatures drop.
Are seamless gutters worth it compared with sectional?
Sectional gutter leaks at the joints, and every joint is a future failure point. Seamless runs are rolled to length on site so the only joints are at corners and outlets. With 55.1 inches of rain a year, fewer joints mainly means fewer places for the sealant to fail under sustained wetting.
What month should I book gutter cleaning in Hodge, LA?
September is the month to aim for — April is the wettest month of the year here at 5.8 inches, and clearing debris before that is worth more than clearing it after. Rain is spread across roughly 12 months here, so a single annual visit tends not to be enough — split it either side of the wettest stretch.
When is the quietest time of year for gutters in Hodge, LA?
August is the driest month locally. With no month averaging a freezing low, that is simply the best window to book installation or repair without working around weather.
Will an older Hodge home need fascia repair as well?
Quite possibly. 33.2% of homes in Hodge, LA were built before 1960 (US Census ACS), and gutters of that era were hung with spikes driven straight through the fascia board. Where a run has been overflowing for years the board behind it is often soft, and it has to be sound before new gutter can be hung — which is the most common reason a quote comes back above the headline $7–$15 per foot.
Month-by-month gutter calendar for Hodge, LA
April is the wettest month in Hodge, LA at 5.8 inches, and August the driest. Rain is spread across 12 months of the year, so there is no single quiet season — inspection matters more here than one annual clean-out. No month averages a freezing low, so ice dams are not a design concern here.
| Month | Rain | High | Low | Gutter load | What to do |
|---|---|---|---|---|---|
| January | 5.2" | 57°F | 37°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
| February | 4.7" | 61°F | 40°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
| March | 5.2" | 69°F | 47°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
| April | 5.8" | 77°F | 54°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
| May | 4.4" | 84°F | 63°F | High | Inspect after heavy rain for overflow at corners and seams |
| June | 4.5" | 91°F | 70°F | High | Inspect after heavy rain for overflow at corners and seams |
| July | 3.9" | 93°F | 73°F | High | Inspect after heavy rain for overflow at corners and seams |
| August | 3.6" | 94°F | 71°F | High | Inspect after heavy rain for overflow at corners and seams |
| September | 3.6" | 89°F | 66°F | High | Clear debris now, before the wet season starts |
| October | 5" | 79°F | 54°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
| November | 4.2" | 67°F | 44°F | High | Inspect after heavy rain for overflow at corners and seams |
| December | 5.2" | 59°F | 39°F | Peak | Heaviest flow of the year — confirm downspouts discharge away from the foundation |
Monthly normals are NOAA 1991–2020 from MONROE RGNL AP, 44 miles away. Gutter load is scored against this city's own wettest month, not a national average.
Hodge, LA homes and what that means for gutter work
| Housing units | 319 |
|---|---|
| Built before 1960 | 33.2% |
| Built since 2010 | 1.3% |
| Single-family detached | 92.8% |
| Owner occupied | 63.5% |
| Median home value | $76,500 |
33.2% of homes here were built before 1960. On stock that age the fascia behind the gutter is often the real job — original hangers were spiked through it, and boards that have carried forty years of overflow usually need repair before a new run can be hung.
92.8% of units are single-family detached, which is the straightforward case: one owner, ground-level access on most elevations, and a continuous run that can be formed on site.
Housing figures are US Census Bureau ACS 2024 5-year estimates.
Hodge gutter cost calculator
Adjust the run length, material and storey count for your own property. Figures are adjusted for Hodge labour rates and the 6-inch profile this city's rainfall calls for.
Gutter cost estimator for Hodge, LA
Typical installed ranges. Not a quote — the final figure depends on fascia condition, access and how many corners the run has.
A typical single-storey home runs 150–200 ft.
Estimated total
$1,425–$3,050
About $9–$19 per linear foot installed
| Line item | Estimate |
|---|---|
| Aluminium gutter, 160 ft | $1,075–$2,350 |
| 4 downspouts | $200–$425 |
| Remove and dispose of existing gutter | $150–$300 |
| Total | $1,425–$3,050 |
Gutter work available in Hodge, LA
Installers in the Hodge network cover seamless installation formed on site, repairs to leaks, sagging and storm damage, and full replacement. The 6-inch profile and 5 downspouts set out above is what a quote here should be based on. See what each service involves.
Signs You Need Seamless Gutter Repair or Installation
- Frequent clogging
- Visible cracks or splits
- Gaps between gutters and fascia boards
- Water pooling around your foundation
- Rust spots or peeling paint on your gutters
Which gutter material suits Hodge, LA
Rainfall volume is the deciding factor here
Volume rather than ice is the constraint here at 55.1 inches a year. Aluminium in .032 gauge handles it and will not rust, which matters on a run that stays wet for weeks at a time; the 6-inch profile does more for capacity than any material upgrade.
Steel is available but rusts from the inside out once the coating is scratched, and under sustained wetting that happens faster here than in a dry climate.
Copper costs several times aluminium and is chosen for appearance and lifespan rather than performance. It needs compatible fasteners and hangers throughout — copper in contact with steel or aluminium corrodes galvanically, which is the most common way an expensive copper run fails early.